Clay County's seat since 1871

Epoxy Flooring in Green Cove Springs, FL

From a former Navy base turned industrial park to a city that grew more than 40% in ten years.

Free estimate at your home, and the slab gets a moisture test
Written quote that lists every prep step and coat
Dew point and slab temperature checked before each coat

Industrial Floors and New Garages

Epoxy Flooring in Green Cove Springs ranges from industrial bays to brand-new garages. The city annexed the former Naval Air Station Green Cove Springs in 1984 for the Clay County Port and Reynolds Industrial Park, according to Wikipedia. That land once held 13 piers on the St. Johns River and a mothball fleet of some 500 vessels. Today its buildings host businesses that need tough floors.

Industrial and commercial floors

Warehouse and manufacturing floors face forklift traffic, pallet jacks and chemical spills. Our usual pick is a heavy 100% solids epoxy build, sealed with a top that resists spills and solvents. Older industrial slabs may need crack repair and leveling first. Safety striping and marked walkways can be built into the system. We plan the work around your schedule so operations can continue.

A fast-growing city

The population rose from 6,908 in 2010 to 9,786 in 2020, an increase of about 41.7%. Much of that growth brought new homes. New slabs need a moisture check and a full grind to remove builder sealers before coating.

Get a free estimate or call (904) 664-5649.

River and spring moisture

Green Cove Springs sits on the St. Johns River at about 16 feet of elevation. The city's sulfur spring flows into a public pool and then to the river. Damp ground near the water can push moisture up through slabs. During Hurricane Irma in 2017, Clay County saw extensive flooding along the St. Johns. A moisture test is part of every estimate.

Farm and dairy work

Gustafson's Farm, a dairy started in 1908, covers nearly 10,000 acres beside the city limits, and agriculture is part of the area's character. Farm shops and equipment buildings need floors that resist manure, feed and fuel. A textured, chemical-resistant coating cleans up well with a hose.

Historic downtown buildings

In the 19th century the city was a spa town with more than a dozen hotels near the spring. Older commercial buildings downtown may have slabs with decades of wear and old coverings. We check for adhesive residue and old patches during prep.

What to Know in Green Cove Springs

Former Navy base turned industrial park. The city annexed the former NAS Green Cove Springs in 1984 for the Clay County Port and Reynolds Industrial Park.
Rapid population growth. The population grew from 6,908 in 2010 to 9,786 in 2020, an increase of about 41.7%.
A large working dairy. Gustafson's Farm, started in 1908, covers nearly 10,000 acres beside the city limits.
On the St. Johns River. The city sits on the river at about 16 feet of elevation, and Irma flooded parts of Clay County along it in 2017.

Our Services in Green Cove Springs, FL

Green Cove Springs Questions

Do you install commercial epoxy flooring in Reynolds Industrial Park?

We work on commercial and industrial floors in the area. We look at traffic, chemicals and schedule first, then recommend a system and lay out the plan in a written quote.

Can a farm shop floor be coated?

Yes. A textured, chemical-resistant system works well for equipment, feed and fuel. We test for moisture first, since farm buildings often lack vapor barriers.

My new home in Green Cove Springs has a bare garage floor. When can it be coated?

After the concrete has cured and its moisture level is acceptable. We measure that at the estimate and tell you if it is ready.

Can older downtown commercial floors be coated?

Usually. We remove old coverings and adhesive, repair damage, and test moisture before coating.

Free Estimates in Green Cove Springs, FL

Homes, farms and industrial buildings in Green Cove Springs get free estimates.

Call (904) 664-5649 Free Estimate