Pool Deck Resurfacing in Jacksonville, FL

Pool deck resurfacing in Jacksonville is mostly about three things: heat underfoot, grip when wet and surviving the sun. A pool deck, patio or lanai takes full afternoon light with July highs near 92 degrees, plus chlorine or salt-system water splashing on it, plus summer storms several times a week. Bare concrete cracks, stains and turns rough. Old coatings peel and fade. Resurfacing gives the deck a new surface without tearing out the slab, as long as the concrete underneath is sound.

Options for a pool deck

HomeGuide lists several approaches. A cool-deck style finish such as Kool Deck runs $4 to $6 per square foot and is described as non-slip and helping to lower surface temperature. Epoxy coatings run $4 to $10. Decorative overlays run $6 to $12 and stamped overlays $7 to $20, and plain sealing is $1 to $3 per square foot. Each has a place. A cool-deck finish suits families who want a cooler, textured surface. A coating with a flake broadcast and a UV-stable top gives more color choice. Overlays can change the look entirely, like a stone or tile pattern.

Why plain epoxy is the wrong top outdoors

On HomeGuide's UV scale, regular epoxy only reaches poor to fair, and an uncovered deck gets hours of direct sun. Plain epoxy outdoors yellows and chalks, and a smooth gloss gets slick when wet. When we use a resin coating outside, it is a polyaspartic or other UV-stable system with texture built in. Light colors are the rule: dark surfaces get hot enough to be uncomfortable for bare feet on a summer afternoon.

Patios and lanais

The same thinking applies to a patio coating or a lanai coating under a screen enclosure. A screen cuts some light and keeps out leaves, but a lanai still sees strong sun and wet feet. Many covered lanais suit a flake system with a polyaspartic top, which looks finished, cleans easily and adds grip. Uncovered patios that drain onto lawns or gardens need a little more texture and careful attention to slope so water does not pool.

Cracks, drainage and the coping

Pool decks move. Soil settles, tree roots push, and the joint between the deck and the pool coping opens and closes with temperature. We fill and repair cracks before resurfacing and keep expansion joints working so the new surface does not crack along the same lines. We also look at drainage: deck drains, slope toward the yard and any spots where water stands after rain. Standing water stains coatings and grows mildew in this humidity.

Storms and the outdoor slab

Outdoor slabs in Northeast Florida see hurricane rain and, near the river and the Beaches, flooding. Hurricane Irma in 2017 pushed the St. Johns River above the 1964 Hurricane Dora records. A coating will not stop flooding, but a sealed, textured surface is easier to wash down after a storm. If your deck has heaved or sunk after a storm, we will say so, because resurfacing over a moving slab only hides the problem for a while.

HOA and condo rules

Many Northeast Florida communities have rules about exterior colors and finishes, and condo associations often control shared pool areas and balconies. Check before scheduling. We can give you the system and color names in writing for your association's review.